Step 1: Connect the speaker wire from the HD3 left (powered) speaker to the right (passive) speaker.
1) Use your thumb and finger to unscrew the binding post connectors on the back of each speaker.
2) Insert each speaker wire into the holes on the side of binding post connectors, making sure to connect the positive (+) terminal on the left speaker to the positive (+) terminal on the right speaker.
3) Retighten the binding posts with your fingers.
4) Verify that only the exposed portion of the speaker wire is secured firmly in each connector.
5) Make sure that none of the speaker wire strands have come in contact with an adjoining terminal.
Step 2: Connect the wireless antenna to the HD3 rear panel.
Step 3: Connect the power cable to the HD3 rear panel and plug the other end into an AC power outlet.
Wireless Connection
Step 4: Turn on the HD3 power switch located on the rear panel. HD3 will automatically go into Bluetooth "pair mode" and the Pair button on the HD3 rear panel should start flashing.
Step 5: On your device (phone, tablet, laptop, etc), turn on Bluetooth and go to Bluetooth preferences.
Step 6: Select "Audioengine HD3" to pair and connect. The Pair indicator on the HD3 rear panel should be solid. Play your music and adjust volume levels on HD3 and your device.
Step 7: To add additional devices put HD3 back into pair mode by disconnecting HD3 from your device or by pressing and holding the Pair button on the HD3 front panel until the pair indicator starts flashing. HD3 can wirelessly connect to only one device at a time, however it will remember up to six different devices.
Wired Connection
Step 8: Connect one of the included audio cables to your music player (phone, tablet, computer, TV, etc) and the other end to an input on the HD3 rear panel.
Step 9: Play your music and adjust the volume on the speakers and your device to the desired listening levels.
For the full setup guide, download the attached PDF:
HD3 Quickstart Guide
1) Use your thumb and finger to unscrew the binding post connectors on the back of each speaker.
2) Insert each speaker wire into the holes on the side of binding post connectors, making sure to connect the positive (+) terminal on the left speaker to the positive (+) terminal on the right speaker.
3) Retighten the binding posts with your fingers.
4) Verify that only the exposed portion of the speaker wire is secured firmly in each connector.
5) Make sure that none of the speaker wire strands have come in contact with an adjoining terminal.
Step 2: Connect the wireless antenna to the HD3 rear panel.
Step 3: Connect the power cable to the HD3 rear panel and plug the other end into an AC power outlet.
Wireless Connection
Step 4: Turn on the HD3 power switch located on the rear panel. HD3 will automatically go into Bluetooth "pair mode" and the Pair button on the HD3 rear panel should start flashing.
Step 5: On your device (phone, tablet, laptop, etc), turn on Bluetooth and go to Bluetooth preferences.
Step 6: Select "Audioengine HD3" to pair and connect. The Pair indicator on the HD3 rear panel should be solid. Play your music and adjust volume levels on HD3 and your device.
Step 7: To add additional devices put HD3 back into pair mode by disconnecting HD3 from your device or by pressing and holding the Pair button on the HD3 front panel until the pair indicator starts flashing. HD3 can wirelessly connect to only one device at a time, however it will remember up to six different devices.
Wired Connection
Step 8: Connect one of the included audio cables to your music player (phone, tablet, computer, TV, etc) and the other end to an input on the HD3 rear panel.
Step 9: Play your music and adjust the volume on the speakers and your device to the desired listening levels.
For the full setup guide, download the attached PDF:
HD3 Quickstart Guide
