N22 Desktop Audio Amplifier

What type of speakers work best with the N22 amplifier?
The N22 is an efficient design and works great with any 4, 6, or 8 ohm passive speakers, including the Audioengine P4!
Thu, 15 Jun, 2017 at 12:14 PM
Will my low impedance (low Z) Grado headphones work with N22?
Yes, the N22 will work well with headphones or earphones with an impedance from 16 to 300 ohms.
Thu, 15 Jun, 2017 at 12:15 PM
Can I increase the length or change the speaker wire between the N22 and each speaker?
Sure. We've included two 5-foot, 16-gauge speaker wires with the N22 but any "stranded" speaker wire will work. The standard-size speaker bind...
Thu, 15 Jun, 2017 at 12:16 PM
Can I connect a subwoofer to the N22?
Yes, simply connect the full-range output of the N22 into your sub's line-level input. The sub and speaker volume can be controlled together by the N22 ...
Thu, 15 Jun, 2017 at 12:16 PM
Is it possible to use the N22 amp to power the rear channels of my surround system?
Yes, the N22 amp + P4 passive speakers + W1 or W3 wireless stereo adapter will make a great-sounding wireless rear channel setup.
Thu, 15 Jun, 2017 at 12:16 PM
Can I take my Audioengine N22 to another country with a different voltage?
Yes, the N22 uses an external switching power supply so it will automatically convert to a different voltage when plugged in. The power cable is also detacha...
Thu, 15 Jun, 2017 at 12:17 PM
Is it OK to remove the stand attached to the N22 and place the amp on it's side?
The N22 needs to be kept upright with the stand attached for proper cooling.
Thu, 15 Jun, 2017 at 12:17 PM
Can I leave the N22 power on all the time?
Sure, the N22 has a power-saving idle mode that activates after you stop playing music. If I plug in headphones will the N22 mute my music playing through th...
Thu, 15 Jun, 2017 at 12:17 PM