Speakers

How to connect a turntable to Audioengine speakers
  How you will need to connect your turntable to your Audioengine speakers mostly depends on the kind of turntable you have. Many modern turntables, such a...
Mon, 20 Feb, 2017 at 2:23 PM
Using our speakers with a television
Hooking up our powered speakers, such as the A2+ and A5+, to a television can depend what connections might be available on the tv for audio output.  If you...
Wed, 8 Mar, 2017 at 2:40 PM
How to connect Audioengine powered speakers to a stereo receiver
Connecting to a stereo or surround-sound receiver As Audioengine powered speakers include built-in power amplifiers, connecting the speaker ter...
Thu, 26 May, 2016 at 9:21 AM
Connecting S8 to original A2
With the original A2s there are two ways to connect a powered subwoofer to them like the S8.  The S8 has two inputs and an output, so you could send the aud...
Wed, 8 Feb, 2017 at 10:19 AM
Low Volume with Turntable Setup
If you’ve connected your turntable to your speakers and the volume is low, one of two situations may be happening: If you have a turntable with a built-...
Tue, 10 Jan, 2017 at 10:48 AM
Where do I connect the ground wire from my turntable to the speakers?
There isn’t a need to connect a ground wire as this is a connection that is needed between the turntable and it's phono preamp (whether the preamp is bu...
Thu, 2 Feb, 2017 at 2:18 PM
Can I connect two sources to my speakers?
The A5+s have two inputs, so having two sources plugged into them is perfectly fine. There isn't any sort of auto switching mode built into the speakers...
Tue, 10 Jan, 2017 at 11:05 AM
Can I lay my speakers sideways?
It shouldn't be a problem having your speakers laying sideways.  If you do use them this way, we typically suggest using a protective padding similar to...
Tue, 10 Jan, 2017 at 11:28 AM
Can I swap the left and right speakers?
It's perfectly fine to swap the left and right speakers if having them that way works better.  It wouldn't affect the sound quality; it would only a...
Tue, 10 Jan, 2017 at 11:32 AM
My subwoofer only has a single LFE input; how can I connect this to your powered speakers?
Using a subwoofer like this with your Audioengine powered speakers should work well. We generally wouldn't recommend the use of a splitter in reverse; i...
Wed, 11 Jan, 2017 at 4:13 PM