Step 1:  Connect audio cables from the B1 rear panel to your music system audio input.


Step 2: Connect the power adapter to B1 with the included power cable and plug the power adapter into an AC outlet.


B1 will automatically go into pair mode and the Pair button on the B1 front panel should be flashing.


Step 3: On your device, turn on Bluetooth and go to Bluetooth preferences.


Step 4: Select "Audioengine B1" to pair and connect.  The Pair indicator on the B1 front panel should be solid.


Step 5: Play your music and adjust volume levels on B1 and your device.


Repeat steps 3 thru 5 to add additional devices.  B1 can connect only one device at a time, however it will remember up to six devices.


To disconnect B1 from a paired device and put B1 back into pair mode, press and hold the Pair button until the indicator begins flashing.



For the full setup guide, download the attached PDF